Automation Components Inc (ACI)


11638 products

Automation Components Inc (ACI)

SCREWDRIVER INSERT

Automation Components Inc (ACI)

SG

Automation Components Inc (ACI)

SL-2000

SL-2000 - The SL-2000 series duct smoke detectors will provide early detection of smoke and products of combustion present in the air moving through HVAC ducts in any commercia industria or residential application. These devices are designed for the prevention of smoke re-circulation by the air handling system fan and blowers.  The SL-2000 is designed and built to meet all local requirement as well as the NFPA regulations regarding duct smoke dectors.  Output terminals are provided for remote accessories such as horn strobe remote status indicator and test/reset key switches or pushbuttons.  The Ionization and Photoelectric detector heads are interchangeable.  Air sampling is accomplished via two tubes that protrude into the duct.  An exhaust tube with a standard length of 7" is supplied in the installation kit with the unit.  Once the duct size is determine a sampling tube must be ordered.  Four standard sizes including a 1 2.5 5 and 10' lengths can be ordered and cut to the correct size of the duct.  The SL-2000 provides two sets of 10A form "C"  and one set of a 2A form "A" alarm contact along with one set of 10A form "C" trouble contacts for monitoring head removal and supply voltage failure.  The SL-2000 is covered by ACI's Two (2) Year Limited Warranty. "No-Tools Required" front or rear loading and removing sampling/exhaust tube Interconnect up to 30 units for common function Magnet test capability (magnet included Unit includes green pilot and red alarm visual indicators

Automation Components Inc (ACI)

SL-2000-N

Automation Components Inc (ACI)

SL-2000-P

Automation Components Inc (ACI)

SL-2000-P-3WTRA

Automation Components Inc (ACI)

SL-2000-P-4WTRA

Automation Components Inc (ACI)

SM-501

SM-501 - The SM-501 series duct smoke detectors will provide early detection of smoke and products of combustion present in the air moving through a duct in any commercia industria or residential application. These devices are designed for the prevention of smoke re-circulation by the air handling system fan and blowers. The SM-501 is designed and built to meet all local requirement as well as the NFPA regulations regarding duct smoke detectors. Output terminals are provided for remote accessories such as horn strobe remote status indicator and test/reset key switches or pushbuttons. Air sampling is accomplished via two tubes that protrude into the duct. An exhaust tube with a standard length of 7" is supplied in the installation kit with the unit. Once the duct size is determine a sampling tube must be ordered. Four standard sizes including a 1 2.5 5 and 10' lengths can be ordered and cut to the correct size of the duct.  The SM-501 provides (2) sets of 10A Form "C" alarm contact along with (1) set of 10A Form "C" trouble contacts for monitoring head removal and supply voltage failure. The green pilot and red alarm indicators provided on the front of the SM-501 signal the operating status of the device. A manual test/reset switch is located next to the LED indicators. (Use part number SM-501-N for ionization and SM501-P for photoelectric).  The SM-501 is covered by ACI's Two (2) Year Limited Warranty. Early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercia Industria and Residential applications. Advanced detector head design yields internal dust filtering with no additional screens or filters to clea Easy mounting without cover removal Compact size

Automation Components Inc (ACI)

SM-501-N

IONIZATION DUCT SMOKE DETECTR

Automation Components Inc (ACI)

SM-501-P

PHOTOELECTRIC DUCT SMOKE DETCT