DinRailClips-Panel Mntg of DLP

A/ENT - The A/ENT is an enthalpy controller which is used to measure temperature and humidty before converting them into a sourced relay output.  The supply voltage to the A/ENT is common to both the N/O and N/C contacts of the 10A Form 1C Relay.  Typically used in conjunction with the A/DIFF-EN the A/ENT converts a capacitive type humidity sensor into a linear 2-wir 4 to 2- mA output.  Its signal is proportional to a scale of 0 to 50 BTU's and is geared towards OEMs of economizers and other devices that require an enthalpy input or economizer control.  Each unit in this series features a coated circuit board and jumper selectable elevation settings.  The A/ENT is covered by ACI's Five (5) Year Limited Warranty.

A/ENT-CTRL - The A/ENT-CTRL is an enthalpy controller which is used to measure temperature and humidty before converting them into a sourced relay output.  The supply voltage to the A/ENT-CTRL is common to both the N/O or N/C contacts of the 10A Form 1C Relay. (The A/ENT-CTRL-F1C's ouput acts as a dry contact rather than sourcing the supply voltage).  Each unit in this series features a coated circuit board and jumper selectable elevation setting.  The A/ENT-CTRL is covered by ACI's Five (5) Year Limited Warranty.

120-277V FREEZE STAT 6'CAP MR

14-45Deg Freeze Stat 20'Cap

15/55F M/R FREEZE STAT

FREEZE STAT DPDT 15/55F 50'