Automation Components Inc (ACI)

11638 products

Automation Components Inc (ACI)

DBL-205D

DBL-205D - The DBL Series Differential Pressure Switches are adjustable vacuu pressure and differential pressure switches designed for both HVAC and Energy Management Applications. Due to the ease of calibration and adjustment procedure these units will save you both installation time and money. Theunits have field adjustable setpoints and switching differentials. They will reset automatically. Each unit contains (1) SPDT contact rated for 1 Amps @ 250 VAC. All wiring connections are to be made with spade connectors and a maximum wire size of 16 AWG.The DBL Series is covered by ACI's Two (2) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalo as well as on ACI's web sit www.workaci.com.

Automation Components Inc (ACI)

DBL-205E

DBL-205E - The DBL Series Differential Pressure Switches are adjustable vacuu pressure and differential pressure switches designed for both HVAC and Energy Management Applications. Due to the ease of calibration and adjustment procedure these units will save you both installation time and money. Theunits have field adjustable setpoints and switching differentials. They will reset automatically. Each unit contains (1) SPDT contact rated for 1 Amps @ 250 VAC. All wiring connections are to be made with spade connectors and a maximum wire size of 16 AWG.The DBL Series is covered by ACI's Two (2) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalo as well as on ACI's web sit www.workaci.com.

Automation Components Inc (ACI)

DBL-205L

DBL-205L - The DBL Series Differential Pressure Switches are adjustable vacuu pressure and differential pressure switches designed for both HVAC and Energy Management Applications. Due to the ease of calibration and adjustment procedure these units will save you both installation time and money. Theunits have field adjustable setpoints and switching differentials. They will reset automatically. Each unit contains (1) SPDT contact rated for 1 Amps @ 250 VAC. All wiring connections are to be made with spade connectors and a maximum wire size of 16 AWG.The DBL Series is covered by ACI's Two (2) Year Limited Warranty. The warranty can be found in the front of ACI's Sensors & Transmitters catalo as well as on ACI's web sit www.workaci.com.

Automation Components Inc (ACI)

DBZ-05

Set of (6) Freeze Stat Clips

Automation Components Inc (ACI)

DBZ-06

Automation Components Inc (ACI)

DH2630B

Automation Components Inc (ACI)

DRC

DRC - The DRC DIN rail adapter kit consists of two flexible plastic DIN rail clips and an adhesive backed foam "stop". Most ACT products are supplied with a snaptrack having prepunched holes to accomodate the DRC clips. The stems on the clips fit into the prepunched holes in the snaptrack and have flexible locking "wings" to prevent them from backing out once installed. The supplied adhesive backed foam stop is used to preventmovement of the board in the snaptrack.

Automation Components Inc (ACI)

DRN3.1

DRN3.1 - The DRN3.1 is an interface that allows microprocessor control of a variable resistance. The DRN3.1's isolated resistor network can be controlled by several different DDC signal types. It directly replaces a variable resistance controller and simulates the action of a slide wire or rotary potentiometer. All connections of the simulated potentiomete the wiper and both ends of the resistance rang are available on the DRN3.1terminal strip.  The DRN3.1 accepts an ANALO PULS or FLOATING POINT input signal (including triac) and converts it into a proportional resistive output. The output resistance does not wrap around if the input signal exceeds the highest or lowest selected input value.  The DRN3.1 has on-board fail-back relays that lock out the original resistive signal during operation.  Howeve if the supply power is los control of the circuit will revert back to the original controller signal.  An easy local override can be made by placing a fixed (or variable) resistor between W and R Fail-safe terminals.  The DRN3.1 is covered by ACI's Two (2) Year Limited Warranty. Electronic potentiomete Electric Actuator control

Automation Components Inc (ACI)

DRN4

DRN4 - The DRN4 is a resistive output motor actuator interface that accepts several types of DDC system signals. The DRN4 output is 0 to 135 ohms. The input signal types are field selectable by an 8-position DIP switch.  The floating point input accepts two digital signal one for increase and the other for decrease.  The floating point full scale rate of change is 55 seconds.  Some triac input signals require an accessory.  The DRN4 is supplied in an enclosure that can be directly mounted to a 1/2" knockout on the motor acuator.  Color coded wire leads with spade connectors are provided for electrical connections.  The DRN4 is covered by ACI's Two (2) Year Limited Warranty. Resistive sensor simulatio Electronic potentiomete Electric Actuator control

Automation Components Inc (ACI)

DRN4 VERSION #2