CURRENT SENSOR 0-5VDC

A/CTV-250 - The A/CTV series current sensors monitor the current flowing to electrical equipment or buildings. The magnitude of this current is then converted into a linear 0 to 10 output signa which can be monitored by your Building Managemen DD or PLC controller. In addition they offer jumper selectable input ranges. The A/CTV series current sensors are fast acting and extremely accurate from 2% or 5% up to 100% of the Full Scale Output depending on the model being ordered. All of the A/CTV series current sensors are factory calibrated using a NIST Traceable standard and shipped with the jumper placed on the largest jumper selectable range. The power for the A/CTV series current transmitters is induced from the conductor being monitored. This means that no external power supply is necessary for the installation of these sensors. The A/CTV-250 current transmitter has jumper selectable ranges of 0-10 0-20 and 0-250Amps. ACI analog current sensors or transmitters are designed for HVAC Building Automation or industrial systems.  Typical applications include: VF building load and load trending equipment. Patented 35mm Din-rail mounting flange Jumper selectable ranges

A/CTV-50 - The A/CTV series current sensors monitor the current flowing to electrical equipment or buildings. The magnitude of this current is then converted into a linear 0 to 10 output signa which can be monitored by your Building Managemen DD or PLC controller. In addition they offer jumper selectable input ranges. The A/CTV series current sensors are fast acting and extremely accurate from 2% or 5% up to 100% of the Full Scale Output depending on the model being ordered. All of the A/CTV series current sensors are factory calibrated using a NIST Traceable standard and shipped with the jumper placed on the largest jumper selectable range. The power for the A/CTV series current transmitters is induced from the conductor being monitored. This means that no external power supply is necessary for the installation of these sensors. The A/CTV-50 current transmitter has jumper selectable ranges of 0-1 0-2 and 0-50Amps. ACI analog current sensors or transmitters are designed for HVAC Building Automation or industrial systems.  Typical applications include: VF building load and load trending equipment. Patented 35mm Din-rail mounting flange Jumper selectable ranges

CURRENT SENSING RELAY

A/DIFF-ENT - The A/DIFF-ENT is an enthalpy controller which measures and converts temperature and humidty into a sources relay output.  The supply voltage to the A/DIFF-ENT is common to both the N/O or N/C contacts of the 10A Form 1C Relay.  Typically used in conjunction with the A/DIFF-EN the A/ENT converts a capacitive type humidty sensor into a linear 2-wir 4 to 20 mA output.  Its signal is proportional to a scale of 0 to 50 BTU's and is geared towards OEMs of economizers and other devices that require an enthalpy inpu or economizer control.  Each unit in this series features a conformally coated circuit board and jumper selectable elevation setting.  The A/DIFF-ENT is covered by ACI's Five (5) Year Limited Warranty.