Automation Components Inc (ACI)

11638 products

Automation Components Inc (ACI)

A/MOUNTING U-CLIP-

Automation Components Inc (ACI)

A/MOUNTING-BEIGE

WALL MOUNT PLATE BEIGE

Automation Components Inc (ACI)

A/MSCS

A/MSCS - The A/MCS and A/MSCS are miniature ?Go/No Go? current status switches designed to replace relays in most applications. These switches are small in statur allowing for tight installations. The output of the A/MCS and the A/MSCS current switches functions as a N/O switc activated by the amount of sensed AC current. The output of these switches uses a N/O solid-state switch (more reliable than a relay) and is non-polarity sensitive. These units perform in any application where the amount of AC current flow is sufficient to indicate the operating status of the sensed load. The A/MCS and A/MSCS Series are covered by ACI's Five (5) Year Limited Warranty. ACI fixed current status switches are designed for HVAC Building Automation or industrial systems.  Typical applications include: go/no g direct drive fan pump heating element critical motor and lighting circuits. Rated up to 150 Amps

Automation Components Inc (ACI)

A/MSCS-A

A/MSCS-A - The A/MCS-A and A/MSCS-A are N/O solid state adjustable current switches. These switches are small in statur allowing for tight installations. They are ideal for providing status information on any equipment that uses AC current. Outputs are non-polarity sensitiv N/O solid-state contacts for switching both AC and DC circuits up to 36 volts. Units also include two Status LED indicator which will signal three states: tripped o current present but below trip poin and current off or below the low end of the adjustable trip point range. A change in current may indicate motor failur belt loss/slippag or mechanical failure. In any of these event the current can significantly increase or decreas thus tripping the current switch and immediately notifying the Building Management System of the failure or problem. The A/MCS-A and A/MSCS-A Series are covered by ACI's Five (5) Year Limited Warranty. Patented 35mm Din-rail mounting flange LED indication

Automation Components Inc (ACI)

A/O-PUP-H

A/O-PUP-H - The ACI pickup port series is used in conjunction with a differentional pressure transmitter to sense additional reference pressures. The A/O-PUP-H is designed to measure pressure outside horizontally. When used in conjunction with an ACI pressure transmitte the ACI pickup port provides excellent accuracy and reliability. 

Automation Components Inc (ACI)

A/O-PUP-V

A/O-PUP-V - The ACI pickup port series is used in conjunction with a differentional pressure transmitter to sense additional reference pressures. The A/O-PUP-V is designed to measure pressure outside vertically. When used in conjunction with an ACI pressure transmitte the ACI pickup port provides excellent accuracy and reliability.

Automation Components Inc (ACI)

A/PN004

Automation Components Inc (ACI)

A/PN021

Automation Components Inc (ACI)

A/PS1.5

A/PS1.5 - The A/PS1.5 adjustable power supply is a low cos dependable external power supply. This unit will accept an input of up to 28 VAC or 35 VD and provides an adjustable 1.2 to 27 VDC output. The A/PS1.5 will supply 1.5A continuous when (Vin- Vout < 15V). The maximum power dissipation is internally limited to 20W.  The A/PS1.5 is covered by ACI's Five (5) Year Limited Warranty. Full and half-wave jumper selectable

Automation Components Inc (ACI)

A/PS24-24V-S

24V ADJ.POWER SUPPLY 1.5-26VDC