A/MCS - The A/MCS and A/MSCS are miniature ?Go/No Go? current status switches designed to replace relays in most applications. These switches are small in statur allowing for tight installations. The output of the A/MCS and the A/MSCS current switches functions as a N/O switc activated by the amount of sensed AC current. The output of these switches uses a N/O solid-state switch (more reliable than a relay) and is non-polarity sensitive. These units perform in any application where the amount of AC current flow is sufficient to indicate the operating status of the sensed load. The A/MCS and A/MSCS Series are covered by ACI's Five (5) Year Limited Warranty.  ACI fixed current status switches are designed for HVAC Building Automation or industrial systems.  Typical applications include: go/no g direct drive fan pump heating element critical motor and lighting circuits. Rated up to 150 Amps

A/MCS-A - The A/MCS-A and A/MSCS-A are N/O solid state adjustable current switches. These switches are small in statur allowing for tight installations. They are ideal for providing status information on any equipment that uses AC current. Outputs are non-polarity sensitiv N/O solid-state contacts for switching both AC and DC circuits up to 36 volts. Units also include two Status LED indicator which will signal three states: tripped o current present but below trip poin and current off or below the low end of the adjustable trip point range. A change in current may indicate motor failur belt loss/slippag or mechanical failure. In any of these event the current can significantly increase or decreas thus tripping the current switch and immediately notifying the Building Management System of the failure or problem. The A/MCS-A and A/MSCS-A Series are covered by ACI's Five (5) Year Limited Warranty. ACI fixed current status switches are designed for HVAC Building Automation or industrial systems.  Typical applications include: go/no g direct drive fan pump heating element critical motor and lighting circuits. Patented 35mm Din-rail mounting flange LED indication