Automation Components Inc (ACI)

11638 products

Automation Components Inc (ACI)

A/RH5-TT1K-R2-1

Automation Components Inc (ACI)

A/RH5-TT1K-R2-2

Automation Components Inc (ACI)

A/RH5-TTM100-D-BB-

Automation Components Inc (ACI)

A/RH5-TTM100-O-4X-

Automation Components Inc (ACI)

A/RH5-TTM1K-D-4X-4

Automation Components Inc (ACI)

A/RH5-TTM1K-D-BB-4

Automation Components Inc (ACI)

A/RH5-TTM1K-O-4X-4

Automation Components Inc (ACI)

A/ROOM-FOAM-PAD

Automation Components Inc (ACI)

A/SCS

A/SCS - The A/CS and A/SCS Series current switches have a solid-state output with a fixed trip point (setpoint). These switches are ideal for providing status information on any type of AC current using equipment.  They should be used in applications requiring a ?Go/No Go? current switch.  A change in the operating current may indicate mechanical failure or that the unit has been turned off.  Units also include a red ?Status? LED that will indicate whether the current is above or below the fixed trip point.  A normally closed version (X) is also available.  Every device on this cutsheet features a patented Din-Rail mounting system (Pat. no. US 41 421) for ease of installation. The A/CS and A/SCS Series are covered by ACI's Five (5) Year Limited Warranty. ACI fixed current status switches are designed for HVAC Building Automation or industrial systems.  Typical applications include: go/no g direct drive fan pump heating element critical motor and lighting circuits. Patented 35mm Din-rail mounting flange LED indicatio Rated to 250 Amps

Automation Components Inc (ACI)

A/SCS-L

A/SCS-L - The A/SCS current switches are available in a split-core with either Normally-Open (N/O) or Normally-Closed (N/C) output configurations. All of these sensors will have a solid-state output with a fixed trip point (setpoint). They are ideal for providing status information on any type of AC current using equipment. Since these units have a split-core desig they make an excellent choice for existing installations because you will not have to power down the unit and disconnect any wires during the installation process. The A/SCS and A/SCSX series current switches should be used in applications in which a ?Go/No Go? current switch is required. A change in the operating current may indicate mechanical failure or that the unit has been turned off. They can be used to monitor devices with a maximum continuous operating current of up to 250 Amps. Since the power for the switch is induced from the conductor being monitore these current switches will not need to be externally powered. Another great feature of the A/SCS and A/SCSX series current switches is that they include a Red ?Status? LED that will indicate whether the current is above or below the fixed trip point. The A/SCS-L current switches have 1.50 Amp trip points. ACI fixed current status switches are designed for HVAC Building Automation or industrial systems.  Typical applications include: go/no g direct drive fan pump heating element critical motor and lighting circuits. Patented 35mm Din-rail mounting flange LED indication